Support Toll Free : 1-800-673-8163
Call time : 24*7
For online Help : Customer Support
Website URL : https://www.techelp.info/
Sometimes, the hard drive on your device can cause problems with your hp laptop support. This can make the device run a little slower than normal. Therefore, a user should remove or disassemble the hard drive and then reassemble it. Doing so may solve the problem and your hp laptop support can work as usual.
In this article, you will learn the basic method to replace HP Pavilion 15 notebook, HP Pavilion 15, and HP Pavilion x360 hard drive. You can also do this process on other models of hp pavilion support number 1-800-673-8163 such as hp desktop support, HP Pavilion DV6, HP Pavilion DV7 and HP Pavilion gaming laptops. To perform this process, you will need a head screwdriver with an opening tool made of plastic. This will help you open the keyboard.
How to disassemble HP Pavilion 17?
Follow the steps below in a systematic way so that you can remove the hard drive without facing any issues.
Slide the bar with the lock icon to the right. You can find it in the upper left hand corner.
This will unlock the battery and you can slide the bar forward left with the battery icon. You can find this strip on the right side of the laptop.
Now, you have to hold the battery and drain it fast.
In addition, begin to remove the 6.5 mm screw (20 in number) using a screwdriver.
If any of these screws are covered with silver stickers, you can gently scrape the stickers to remove the screw.
Continually, you must remove the black corner cover on either side of the battery.
Here, you will see four additional punches, which you must remove one by one.
Also, remove the CD-ROM by pressing the small button above it.
Later, you have to open the laptop as well as open the laptop.
Now gently open the keyboard with the help of the plastic opening tool.
This will allow you to easily access the hard drive that usually exists on the right side of the RAM and above the motherboard.
Again use a plastic tool to separate the plate from the face and proceed to the final step.
Finally, disconnect the cable by pulling out its base but not the ribbon.
HP Pavilion Laptop Reassemble Method
Once you disassemble the laptop by removing all of its components, you can be assured to check whether your laptop has started functioning normally with good speed. To reassemble it, you have to follow the process in a reverse way. You can use contact hp customer support Scan Doctor to get rid of some minor problems with hp pavilion tech support phone number devices.
For more help:
If you are not able to follow the procedure given in this article, you can seek expert help from hp laptop technical support number 1-800-673-8163 team. Visit for more details https://www.techelp.info/